Trench Exhausted 3 Miniature Weary Sword Bearer
About this miniature
Made from high-quality resin. Brandishing a sword like a medieval cross, the Exhausted 3 Miniature by Onmioji from We Print Miniatures captures the poignant moment when even the fiercest warrior dreams of peace. This weary fighter stands with weapon in hand, not in defiance but in reflection, as if the battles fought have left more scars on the soul than on the body. The sculpt conveys a deep sense of fatigue and humanity, from the slump of the shoulders to the quiet resignation in the stance. The sword, held upright like a symbol of faith or surrender, adds a layer of symbolism that makes this figure perfect for storytelling campaigns. Painters will enjoy bringing out the textures of worn armour, tattered clothing, and the gentle play of light on metal and skin. Staying true to Onmioji’s original design, this fantasy miniature is available in 28mm, 32mm, 35mm, 55mm, and 75mm scales, making it ideal for Dungeons and Dragons or any narrative-driven tabletop adventure. this miniature reads as a battered trench-war survivor: barefoot, hunched low, gripping a long sword planted upright like a devotional standard. A rosary-like strand of beads and a dangling cross reinforce the crusader/cultist tone, while the ragged hooded cloak and strained posture sell the “exhausted” theme at a glance. This makes an excellent centerpiece character for grimdark encounters, trench-raiding scenarios, or a penitent hero moment in RPG sessions.Printed as a high-detail resin miniature, it’s designed for crisp surfaces and deep shadows—ideal for washes, edge highlights, and weathering effects. Whether you field it as a Trench Crusade fighter, a human cultist, or a grim pilgrim hero, these resin miniatures are built to support strong narrative basing and display painting.
this miniature reads as a battered trench-war survivor: barefoot, hunched low, gripping a long sword planted upright like a devotional standard. A rosary-like strand of beads and a dangling cross reinforce the crusader/cultist tone, while the ragged hooded cloak and strained posture sell the “exhausted” theme at a glance. This makes an excellent centerpiece character for grimdark encounters, trench-raiding scenarios, or a penitent hero moment in RPG sessions.
Printed as a high-detail resin miniature, it’s designed for crisp surfaces and deep shadows—ideal for washes, edge highlights, and weathering effects. Whether you field it as a Trench Crusade fighter, a human cultist, or a grim pilgrim hero, these resin miniatures are built to support strong narrative basing and display painting.
More Miniatures....
How we size our miniatures
We measure every mini from foot to eyeline, assuming a 6 ft male — so the millimetre is the eyeline, not the top of the helmet. Females, monsters, and smaller folk scale up or down so they don't look silly standing next to a standard human.
The standard for games like D&D and many roleplay games as well as older versions of Grimdark Battlefields.
Many games use this size as it provides more detail for painting and to fit with modern game systems like Grimdark Wargames and skirmish games. Also used for 28mm Monsters to give them even more threat.
When you need a bit more threat a 35mm mini in a 32 or 28mm game can add real weight to an encounter. Great for painting to maximise detail for the tabletop
Showpiece scale — built for shelf display, busts, and showcase paint jobs. Maximum surface area for blending, framing, and competition-grade detail.
Need something bespoke? Hit "Custom Size" on any product page — we'll print to your spec.
Questions we get asked
A LOT
We dispatch orders 5 days a week, due to our on-demand nature bigger orders can take longer to print and pass quality assurance. Our average dispatch time is 4 days with out longest 20 days for very large orders. You can contact us at anytime to check on the status of your order and any holdups. We can usually part dispatch any UK order is taking longer than usual, just ask!
NO!All our miniatures are dispatched washed and cured to offer you a clean and perfect base to prime and paint from. No waiting, just miniatures ready to use.
We print to order, so 3–5 working days on average but at busy times i can take a little longer for the UK and 7–14 for everywhere else.
Our Miniatures are made from Light reactive Resin, it's all very cutting edge science or witch craft we arn't too sure.
Our resin is designed to flex rather than snap, which helps prevent breakages during shipping. Occasionally, thin parts like swords, staffs, or gun barrels may arrive slightly bent—this is normal and easy to fix.
Recommended method – Warm water:
Dip the bent part into a bowl of lukewarm water for about 1 second, then gently hold the miniature so the part points straight down. If needed, repeat the process, adding an extra second or two. Once the resin cools, the new position will be locked in.
Other methods:
A hair dryer can work, but we don’t recommend it as heating the whole miniature may soften details or cause unwanted bends.
A radiator can also work, but use extreme care—too much heat can damage the resin.
If you’re unsure or need help, just get in touch and we’ll be happy to advise.
United Kingdom
Standard Shipping
- Standard UK Postage £3.95 or Free Over £50
Large or fragile shipping
- £5.50 or Free over £50
USA & Canada
International Parcel
- Standard International $18
- Free Over $100
We print all our orders on demand which means at busy times their can take us up-to 5 day to print and ship your order. Large orders will take longer to fulfill and we may choose to part dispatch your order so your not waiting too long before at least recieving some of your order.
For the rest of the world is usually takes 7 - 16 days after dispatch. Please note Christmas can add a number of extra days onto all processing and shipping times .
Don't worry get in-touch with us and quote your order number and a replacement miniature will be dispatched ASAP. We try and remedy broken miniatures as a priority but during busy times it can take us a few days extra to get a replacement sent to you.
You can dispose of the broken miniature as you see fit or use it as part of your conversion projects.
Of course you can have a full refund and we wont quibble about it either. Please contact our support team and quote your order number and which parts you would like refunded. We work very hard to give 5 Star Service and Quality but understand we can't get it right every time. We hope you will consider us again in future, we are always learning!
With large orders or at busy times we might choose to part ship your order, this usually happens if one or two minaiture in a large order are causing many others to sit around not in your hands.
In this case we ship what we have and follow up with the missing miniatures a few days later.
In some rare cases we might have to declare a miniature unprintable and offer you a full refund or store credit, your choice.