Zenphyre Printing Service
The monsters everyone knows from a roleplaying night, plus the heroes who walk in after them. Dungeon creatures stood square and steady, sculpted to look solid on a table.
Zenphyre sells these files themselves. Get the monsters and heroes you want from the designer first, then bring the files back here and upload them.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Their monsters, our printers
How to get Zenphyre files to print
The files come from Zenphyre direct. A monthly membership is how the monsters and heroes are shared, so take the ones you want from the designer and upload them here.
VISIT ZENPHYREWhat we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
Zenphyre sculpts the monsters everyone knows from a roleplaying night, and the heroes who walk in after them. Dungeon creatures stand square and steady, built to look solid on a table rather than balanced on a fingertip, which is exactly what a long campaign wants from a miniature that gets handled every session.
Get the monsters and heroes you want from the designer first, then bring the files back here and upload them. The price lands on screen the instant the upload finishes, with no quote form, no minimum and nothing to wait for. One monster is an order.
Models come back as grey resin prints from our studio in the UK, washed and cured, and reach you ready for primer and paint.
Got a file already? Upload it and the price is on screen in seconds.