DESIGNER Gothic sci-fi · 28 TO 75MM

The Makers Cult Printing Service

Gothic infantry in heavy armour. Mining troopers, walkers and weapons platforms, and armoured transports to carry them forward, which is the sort of grim industrial company that wants to be seen in numbers.

STEP ONE — GET THE FILES

The Makers Cult sells the files themselves, so head there first. Pick the infantry, the walkers or the transports you want, then bring the files back here to print.

PATREONSubscribe for minis every month WEBSITEVisit The Makers Cult website

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

A grim army, printed

The Makers Cult sculpts a grim industrial army. Gothic infantry in heavy armour, mining troopers who look like they were handed a rifle on the way out of the shaft, walkers and weapons platforms, and armoured transports behind them. It is a range built for numbers, and The Makers Cult draws it to hold together as one force.

Send the files and the company prints in our own UK studio, in high detail grey resin, cleaned and ready to paint, posted to your door. Each model is priced as it uploads, so ten troopers show ten prices before you buy.

Over 35,000 customers rate our high quality resin 5 stars.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell The Makers Cult files. They do, on the 2 channels listed above. Pick what you want there, then bring it back here and we will print it.

How to get The Makers Cult files to print

Get the files from The Makers Cult first. There is a monthly collection to follow and single sculpts sold one at a time. Download what you need, upload it here and set the height.

VISIT THE MAKERS CULT

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.