DESIGNER Undead fantasy · 28 TO 75MM

Fable Frog Studio Printing Service

Skeletons hauling themselves out of the ground, risen warriors with rusted blades, and the heroes sent to put them back down. A whole graveyard's worth of trouble sitting in one folder.

STEP ONE — GET THE FILES

Fable Frog Studio sells these files themselves, so buy the ones you want from them first. Download them, then bring them here and we take it from there.

MYMINIFACTORYSubscribe monthly, or buy just the minis you want

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

The risen dead, printed

Fable Frog Studio works one theme hard. Skeletons clawing their way up through the soil, risen warriors carrying rusted blades and split shields, and the fantasy heroes and monsters sent to meet them. The bone is sculpted with real texture, cracked and pitted, so a rank of them never reads as the same figure twice.

Have them printed and that detail earns its keep. Send the files you already own, choose a size and the price appears as you upload, with one skeleton counting as a proper order. We print in high detail grey resin in our own UK studio, clean every model and post it ready for primer, so your Fable Frog dead arrive ready to paint.

Over 35,000 customers rate our high quality resin 5 stars.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell Fable Frog Studio files. They do, on the 1 channel listed above. Pick what you want there, then bring it back here and we will print it.

How to get Fable Frog Studio files to print

Fable Frog Studio sells the files, so that is the place to get them. Buy singly or subscribe for the wider collection, download what you want, then upload it here for printing.

VISIT FABLE FROG STUDIO

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.