Tripo AI STL printing service
A prompt, a photo, a rough drawing. Whatever went in, you now have a fantasy hero or a creature sitting in a folder with whatever proportions the generator felt like giving it.
The generator holds the model until you export it, so download yours there first. Bring the file back to us as it came out and we will take it from there.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Generated sculpts, our printers
How to get Tripo AI STL printing service files to print
Export the model from the generator, then upload it here just as it came. Tell us the height you want and we set the size, print it in grey resin and post it out.
What we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
Tripo builds a model from a prompt, a photograph or a rough drawing, and it does it quickly: fantasy heroes, creatures and characters textured well enough to look finished on screen. What Tripo leaves open is how tall the thing ought to be, so the mesh reaches you at no particular size at all.
We set that part. Tell us the height you want, from gaming size up to display size or an exact figure of your own, and we print the model at that height, with the preparation already included in the price. The price is on the page the second you upload, with no form and no minimum order.
Your model comes back in light-reactive grey resin from our UK studio, cleaned and ready for primer. Export the mesh from Tripo as it came out, upload it here, and we take it from there.
Got a file already? Upload it and the price is on screen in seconds.