Meshy STL printing service
A prompt, or a reference image, and there is your character. Sword arm out, cloak moving, already built with the proportions you had in mind when you described it.
The model is made and downloaded in the generator itself. Export it there, then bring the file straight back here and we will take care of the printing.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Prompted sculpts, our printers
How to get Meshy STL printing service files to print
Export the finished model from the generator you built it in, then upload that file here. Pick a height, and we get it ready, print it in grey resin and post it to your door.
What we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
A prompt or a reference image goes in, and out comes a character you can spin around on screen: sword arm out, cloak caught mid movement, proportioned for a tabletop from the start. What Meshy hands back is a real mesh rather than a picture, which is the part that matters once you want to hold it.
An outstretched arm and a thin blade want a careful setup on a resin printer, and that is our end of the job. Upload your model to our Meshy STL printing service and the price is on the page instantly, with the setup already inside it. Nothing to fill in, no minimum spend, and one figure is a genuine order.
Your character is printed in light-reactive resin in the UK, washed and cured after printing, and despatched ready to prime and paint.
Got a file already? Upload it and the price is on screen in seconds.