Regrid Book Miniature Arcane Mage Scholar Wizard
About this miniature
Made from high-quality resin. Reading up on miniatures-scale magic with intense focus, the Regrid Book Miniature by Haito from We Print Miniatures is deep in study, knowing full well that one mispronounced word could lead to explosive consequences. Clutching an ancient tome and cloaked in flowing robes, she embodies the careful balance between knowledge and power. Whether she’s a dedicated scholar, arcane apprentice or high-ranking mage preparing for a risky casting, this fantasy miniature is perfect for Dungeons and Dragons or other fantasy tabletop games that feature magical mishaps and academic adventures. Available in 28mm, 32mm, 35mm, 55mm and 75mm scales, the sculpt offers intricate details from the worn book to her concentrated expression. True to Haito’s original design, Regrid Book captures the tension and excitement of magic in motion, making her an excellent choice for players and painters who love a character with both intellect and charm. Regrid is posed mid-incantation over an open spellbook, with one hand hovering as if tracing runes or turning a page. Her long flowing hair, layered gown, and ruffled robe details reinforce the “arcane scholar” vibe—ideal as a wizard, mage, sorceress, librarian, or academy researcher NPC/PC. The strong facial focus and book-forward silhouette make this model read clearly on the tabletop while still providing plenty of raised detail for painters (fabric folds, trim, and the book’s pages). This is a resin miniature (also suitable as part of resin miniatures collections) for roleplaying encounters, magical colleges, wizard towers, or any campaign where spellcraft and forbidden tomes take center stage.
Regrid is posed mid-incantation over an open spellbook, with one hand hovering as if tracing runes or turning a page. Her long flowing hair, layered gown, and ruffled robe details reinforce the “arcane scholar” vibe—ideal as a wizard, mage, sorceress, librarian, or academy researcher NPC/PC. The strong facial focus and book-forward silhouette make this model read clearly on the tabletop while still providing plenty of raised detail for painters (fabric folds, trim, and the book’s pages). This is a resin miniature (also suitable as part of resin miniatures collections) for roleplaying encounters, magical colleges, wizard towers, or any campaign where spellcraft and forbidden tomes take center stage.
You might also like
How we size our miniatures
We measure every mini from foot to eyeline, assuming a 6 ft male, so the millimetre is the eyeline, not the top of the helmet. Females, monsters, and smaller folk scale up or down so they don't look silly standing next to a standard human.
The standard for games like D&D and many roleplay games as well as older versions of Grimdark Battlefields.
Many games use this size as it provides more detail for painting and to fit with modern game systems like Grimdark Wargames and skirmish games. Also used for 28mm Monsters to give them even more threat.
When you need a bit more threat a 35mm mini in a 32 or 28mm game can add real weight to an encounter. Great for painting to maximise detail for the tabletop
Built for shelf display, busts and showcase paint jobs. Maximum surface area for blending, framing and competition-grade detail.
Browse our full range and pick the size that suits your project on any product page.
Questions we get asked
A LOT
We dispatch orders five days a week. Everything is printed to order, so bigger orders take longer to print and pass quality checks. Our average dispatch time is 4 days, and very large orders can take up to 20 days. You can contact us at any time to check on your order. If a UK order is taking longer than usual, we can usually send part of it first: just ask!
No! All our miniatures are dispatched washed and cured, so they arrive as a clean base to prime and paint. No waiting, just miniatures ready to use.
Most orders are dispatched within 4 days. Royal Mail usually delivers in 2 to 3 days in the UK and 7 to 16 days to the rest of the world. Busy periods and Christmas can add a few days.
Our miniatures are made from light-reactive resin. It's all very cutting-edge science (or witchcraft, we aren't too sure).
Our resin is designed to flex rather than snap, which helps prevent breakages in the post. Now and then a thin part like a sword, staff or gun barrel arrives slightly bent. This is normal and easy to fix.
Warm water: dip the bent part in water at 40 to 50°C for 10 seconds, then hang the miniature upside down with the part pointing at the floor so gravity straightens it. Let it cool fully before you turn it upright. Still bent? Dip it again for 20 seconds; thicker parts take a little longer.
Never use a radiator, microwave or oven. If you're unsure, just get in touch and we'll be happy to help.
United Kingdom
- Standard: £4.95
- Large miniatures: £5.50
- Free UK shipping on orders of £55 and over
USA
- Standard International: $26
- Free over $115
Canada
- Standard International: $18
- Free over $150
Australia and New Zealand
- Calculated at checkout
Once your order ships we'll email you. Everything is printed to order, so at busy times it can take up to 5 days to print and dispatch. Large orders take longer, and we may send part of your order first so you're not waiting for all of it.
Royal Mail usually delivers in 2 to 3 days in the UK and 7 to 16 days to the rest of the world. Christmas can add a few extra days.
Don't worry. Get in touch, quote your order number, and we'll send a replacement as a priority. At busy times it can take a few extra days.
There's no need to send the broken miniature back: keep it for a conversion project.
Yes. You can ask for a refund within 30 days of receiving your order. Contact our support team with your order number and the items you'd like refunded.
If something arrives damaged, faulty or wrong, we'll replace or refund it at no cost to you. If you've changed your mind or ordered the wrong size, we may ask you to send it back at your cost first. Full details are in our Refund Policy.
A slight sheen on some areas is completely normal for cured resin and does not affect the model. It can show where supports were removed or where the surface cured a little differently during printing.
If you'd like a uniform finish, a quick scuff with fine sandpaper followed by your usual primer gives an even, matt surface ready to paint.