Onmioji Printing Service
Orcs and goblins in one folder, Cossack cavalry in the next, then a wild west gunslinger, a demon and a cyberpunk trooper. The collection sprawls, and that is half the appeal of it.
Onmioji sells the files, so head there first. Pick the orcs, the cavalry or the gunslinger you want, then bring the file back here and we print it for you.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Old school sculpts, printed here
How to get Onmioji files to print
Onmioji sells the files, so start there. Single sculpts are sold on their own, and there is a monthly collection if you would rather have the lot. Bring the file back here and choose a height.
VISIT ONMIOJIWhat we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
Onmioji sculpts old school, and sculpts a great deal of it: orcs and goblins, undead and demons, Cossack cavalry, wild west gunslingers and cyberpunk troopers, all with the chunky confidence of the miniatures a lot of us grew up on. The range is wide enough that an Onmioji folder tends to sprawl.
Head to Onmioji for the files first, pick the orcs, the cavalry or the gunslinger you want, then bring the file back here. Upload it and the cost appears on screen at once, with no minimum and nothing to fill in beforehand. One goblin is a real order and we treat it as one.
Each model is printed in a light-reactive grey resin, cleaned and ready to paint, then despatched to you from our UK studio.
Got a file already? Upload it and the price is on screen in seconds.