Unit9 Printing Service
A strike team moving down a wet street. Corporate operatives in good coats, riot police behind shields, cyborgs, gang muscle, and the street terrain they are all fighting over.
Unit9 sells the files themselves. Pick the crew and the street pieces you want from one of their own storefronts, then bring the files back here to be printed.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Cyberpunk streets in resin
How to get Unit9 files to print
Unit9 sells the files themselves. Follow their ongoing collection or buy a single crew outright, download the files you want, then come back to this page and upload them for printing.
VISIT UNIT9What we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
Cyberpunk at street level is what Unit9 sculpts. Strike teams moving down a wet road, corporate operatives in expensive coats, riot police behind shields, cyborgs with the work showing, and gang muscle holding the corner. The street terrain comes from the same hand, so the fight and the place it happens in match each other.
Pick the crew and the street pieces you want from Unit9's own storefronts, then upload the files here. The price appears the moment the upload finishes, with no quote form, no minimum and nobody to wait on. One operative is a normal order.
Your models arrive as grey resin prints with the fine surface detail intact, washed and cured in the UK and posted to your door.
Got a file already? Upload it and the price is on screen in seconds.