DESIGNER Terrain · 28 TO 75MM

Syllogy Printing Service

Matt Mason works as Syllogy, making files for a variety of games. Terrain first, then the pieces and figures that fill a board out around it.

STEP ONE: GET THE FILES

Syllogy sells the files on Patreon, alongside a Discord for the community around them. Pick up what you want there and download it, then upload the file on this page.

PATREONSubscribe for minis every month

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

Syllogy sculpts, we print

Terrain is where Matt Mason made his name, and Syllogy has grown out from it into files for a variety of games. Cyberpunk streets, science fiction squads dug in around a landing zone, ruins and the scenery that turns a flat board into a place, released to members and backed by a Discord community. Terrain and figures both reward a clean print. Upload a Syllogy file and the price appears at once, calculated from the model and the size you pick, with no minimum order. We print to order in grey resin in our UK studio, clean the piece and post it out ready to prime. Scenery can be sized up on the upload page if you need it bigger.

10,000+ 5★ reviews across our store and marketplace.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell syllogy files. They do, on the 1 channel listed above. Pick what you want there, then bring it back here and we will print it.

How to get syllogy files to print

Syllogy releases the files through Patreon. Download the model from a release you own and upload it here to be printed.

VISIT SYLLOGY

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £4.95, and UK delivery is free on orders of £55 and over. Large miniatures are £5.50. Postage to the USA is $20, and free on orders over $100. Other countries are calculated at checkout.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.