DESIGNER Display figures · 28 TO 75MM

Bulkamancer Sculpts Printing Service

Statues that come in several parts, slender weapons, cloth trailing behind a figure that was never meant to be small. Bulkamancer sculpts are display pieces first and it shows.

STEP ONE — GET THE FILES

Bulkamancer sells the files themselves. Buy the statue you want from them first, every part of it, then bring the files back here and we print the lot.

PATREONSubscribe for minis every month MYMINIFACTORYSubscribe monthly, or buy just the minis you want CULTS3DBuy just the minis you want

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

Their sculpts, our printers

Bulkamancer Sculpts draws characters at a size that lets a sculptor show off. Statues arrive as several parts, weapons stay slender, and cloth trails out behind a figure with room around it. These were never meant to be squinted at from across a table.

Send the parts here and a Bulkamancer file comes back in high detail grey resin, cleaned and ready for primer, printed in our own UK studio and packed for the post. Put every part in one order, see the price as you upload, and one statue is a whole order for plenty of people.

Over 35,000 customers rate our high quality resin 5 stars.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell Bulkamancer Sculpts files. They do, on the 3 channels listed above. Pick what you want there, then bring it back here and we will print it.

How to get Bulkamancer Sculpts files to print

The files come from Bulkamancer Sculpts. Buy the statue you want over there, as a membership or as a single download, and make sure you take every part file before uploading them here.

VISIT BULKAMANCER SCULPTS

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.