DESIGNER Tabletop Miniatures · 28 TO 75MM

3D Fortress Printing Service

High detail miniatures for the tabletop, released by 3D Fortress in themed collections that run from anime figures through to vehicles.

STEP ONE: GET THE FILES

3D Fortress publishes on Patreon, with a free membership and paid membership options. Download the collection your membership covers, then upload those files on this page.

PATREONSubscribe for minis every month

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

3D Fortress designs, we print

High detail printable miniatures for the tabletop are what 3D Fortress puts out, arranged into themed collections that are announced ahead of time and delivered on a set date. Subjects range across the collections, from anime figures to vehicles. All of it is digital. Turning any of it into something paintable needs a resin printer and the routine that goes with one. Upload a 3D Fortress file you own and our price comes back at once, based on the model. There is no minimum order. We print to order in grey resin in the UK, then wash, clean and de support every piece before packing. It arrives clean, grey and ready for primer.

Over 35,000 customers rate our high quality resin 5 stars.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell 3D_FORTRESS_ files. They do, on the 1 channel listed above. Pick what you want there, then bring it back here and we will print it.

How to get 3D_FORTRESS_ files to print

3D Fortress sells the files on Patreon. Download the models included in your membership, then upload them here to have them printed.

VISIT 3D_FORTRESS_

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £4.95, and UK delivery is free on orders of £55 and over. Large miniatures are £5.50. Postage to the USA is $20, and free on orders over $100. Other countries are calculated at checkout.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.