Workbench Guides · Sizes

Miniature Sizes Explained

28mm, 32mm, 35mm, 55mm or 75mm? Here's how we measure our miniatures, how our sizes line up against the ranges you already own, and how to pick the right one first time.

Measure Compare Choose
Measured foot to eye Checked before dispatch Five sizes to choose from
Compare sizes side by side Line our miniatures up against the ranges you know

Miniature sizes sound simple until you put two ranges next to each other. A 28mm figure from one maker can stand head and shoulders above a 28mm figure from another, and that's before anyone mentions heroic scale.

This miniature size guide explains exactly what our numbers mean, so you can match a collection you already own or start a new one with confidence. Every miniature we print is measured against its stated size before it leaves us, so the number on the product page is the number you get.

The short answer

  • We measure from the soles of the feet to the eyes, not to the top of the head.
  • The size is how tall a 6ft human stands at that size. Shorter and taller characters measure less or more, on purpose.
  • The base isn't counted.
  • Matching a collection? Measure one of your own miniatures the same way and pick our nearest size.

Still not sure? Line them up in our compare tool and see for yourself.

01

How we measure a miniature

Foot to eye, on a 6ft human, standing up straight.

All our miniatures are measured from the soles of the feet to the eyes. This is the industry standard, and it's based on an average human male standing 6ft tall, upright, with at least one foot planted on the ground. So a 32mm miniature of a 6ft human measures 32mm from the soles of his feet to his eyes.

Why the eyes and not the top of the head? Because heads come with helmets, hats, hoods, hair and, in Bob's case, a fine pair of horns. The eyes are the one point every character has in roughly the same place. The base isn't counted either, as bases come in all sorts of thicknesses.

If a miniature is posed with bent legs, a wide stance or kneeling, we adjust the measurement so its proportions stay correct next to a standing 6ft human. That keeps everything consistent across your collection, whatever the pose.

The knight figure with dimension lines: the size is measured from the soles of the feet to the eye line. The top of the head and the base are not counted.

Tap the diagram to open it full size.

Foot to eye. The dimension runs from the soles of the feet to the eye line. The horns, helmet and base all sit outside it, which is why two miniatures of the same size can look different heights on the shelf.

02

Our five sizes

28mm, 32mm, 35mm, 55mm and 75mm, all measured the same way.

The jump between sizes is bigger than the numbers suggest, because a miniature grows in every direction at once. A 35mm figure isn't just a little taller than a 28mm one. It's broader, chunkier and noticeably heavier on the table. Here's Bob at all five sizes, drawn to scale.

The knight figure lined up at 28, 32, 35, 55 and 75mm, drawn to scale with size pills beneath, the way the compare tool shows them

Tap the diagram to open it full size.

The same knight at every size. The green line marks the eyes on each one. This is how the lineup looks in our compare tool, where you can tap the size pill under any miniature to switch between sizes.

28mm
Classic tabletop size. A good match for older collections and traditional wargaming ranges.
32mm
Where most modern tabletop roleplaying and heroic ranges sit today.
35mm
A touch more presence on the table, and a match for the larger modern heroic ranges.
55mm
Display pieces and painting projects, with room to really go to town on the detail.
75mm
Showpieces for the shelf and the painting competition.
03

Not everyone is 6ft

The size describes the range, not the height of every character in it.

The 6ft human is the yardstick, and everyone else is sculpted in proportion to him. So a 32mm dwarf or halfling measures less than 32mm from foot to eye, and a 32mm ogre or a mounted figure measures more. That's intended and correct. After all, no one wants a halfling towering at 6ft tall. It'd eat us out of house and home.

The same goes for women, aliens and anything else that isn't a 6ft human male. They'll stand at their natural height next to him, which is exactly what you want when they share a table.

Three knight figures all bought at 32mm: a 4ft dwarf whose eyes sit below the 32mm line, a 6ft human whose eyes sit on it, and an 8ft ogre whose eyes sit above it

Tap the diagram to open it full size.

Three characters, all bought at 32mm. Only the 6ft human has his eyes on the 32mm line. The dwarf comes in under it and the ogre over it, so they look right standing together.

04

How other ranges compare

The number on the box is a starting point, not a promise.

Miniature sizes have been creeping upwards for decades. What everyone now calls 28mm started out as 25mm, and plenty of ranges sold as 28mm today measure closer to 30mm or more. Some makers measure to the top of the head rather than the eyes, and heroic ranges deliberately use bigger heads, hands and weapons so they read well across a table.

So please don't assume a size from the game you play. Warhammer hasn't been a single 28mm standard for over twenty years, and ranges sold as heroic or historic 28mm are routinely 30mm measured foot to eye. We've compared over 2,000 miniatures against the leading ranges, and these are the rough figures we work to.

Warhammer 40,000 is a good example of how much one game can vary. Astra Militarum guardsmen like the Cadians come out at about 28mm foot to eye, while current Space Marines stand around 35mm. Necromunda's gangers sit in between, noticeably taller than the Guard, at around 32mm. So depending on which army you're matching, any of our 28mm, 32mm or 35mm sizes could be the right one.

Grey knight figures standing in for other ranges, Astra Militarum at about 28mm, Hero Forge at about 30mm, Necromunda at about 32mm, Space Marines at about 35mm and Crisis Protocol or Shatterpoint at 40mm, lined up with our 28, 32 and 35mm sizes in crimson

Tap the diagram to open it full size.

Other ranges next to ours. The grey figures stand in for other makers' ranges at their typical foot to eye height. The compare tool has real reference figures from popular games under its Brands tab.

If you play or collectRoughly foot to eye, and our closest size
Classic 28mm wargames ranges and historicalsAbout 28mm. Start with our 28mm
Hero Forge, standard sizeAbout 30mm. Measure one of yours to choose between 28mm and 32mm
Modern Dungeons & Dragons and Pathfinder rangesUsually around 32mm. Start with our 32mm
Warhammer 40,000 Astra Militarum, such as CadiansAbout 28mm. Start with our 28mm
Necromunda gangsAround 32mm, taller than the Guard. Start with our 32mm
Warhammer 40,000 Space MarinesAround 35mm on current kits, smaller on older ones. Start with our 35mm, or measure one of yours
Other modern heroic rangesAnywhere from 30mm to 35mm. Measure one of yours, then pick 32mm or 35mm
Marvel: Crisis Protocol and Star Wars: Shatterpoint40mm. Our 35mm is the closest, and will stand a little shorter

These are rough guides, not guarantees. Sculptors vary, even within one range, and older and newer kits from the same maker can differ by several millimetres. The only measurement that really counts is one taken from a miniature already in your collection.

05

Measure one of your own

Two minutes with a ruler beats any chart.

If you're adding to a collection, the easiest way to get a perfect match is to measure a miniature you already own, exactly the way we measure ours, and order to that number.

A grey knight figure standing for one of your own miniatures, with a ruler beside it reading 31mm from the soles of the feet to the eyes, so the nearest size to order is 32mm

Tap the diagram to open it full size.

Reading your own miniature. Zero sits at the soles of the feet, on top of the base. Read across from the eyes, then pick our nearest size.

  1. Pick one that stands up straight

    Choose a human figure standing upright, rather than one who's kneeling, crouching or mid-leap. A 6ft human is the yardstick, so he's the best one to measure.

  2. Find the soles of the feet

    Your zero is where the feet meet the top of the base, not the underside of the base. Line the end of your ruler up with it.

  3. Read across from the eyes

    Look straight on at eye level and read the ruler where the eyes are. A steel rule or a pair of calipers makes this easy.

  4. Pick our nearest size

    Measured 31mm? Our 32mm is your match. Measured 29mm? Go for 28mm. If you land right between two sizes, try them side by side in the compare tool.

Try it in the compare tool

See our miniatures side by side, at any size, before you buy.

Our compare tool puts miniatures next to each other at their true sizes, so you can see the difference instead of imagining it. It works just like the lineups on this page, only with real miniatures from our range and reference figures from games you'll know.

  1. Add miniatures to the lineup

    Open the catalogue and pick the miniatures you're interested in. Drag them into the lineup in whatever order you like.

  2. Set each one's size

    Tap the size pill under any miniature to switch between 28mm, 32mm, 35mm, 55mm and 75mm, or set a custom size in millimetres.

  3. Add a figure you already know

    The Brands tab has reference figures from popular games. Drop one into the lineup to see how our sizes stand next to the miniatures already on your shelf.

  4. Spin them round

    Open any of our miniatures in 360 to see it from every side before you choose.

Open the compare tool

Sizing mistakes we see all the time

Measuring to the top of the horns

Bob's horns add a good few millimetres. They don't count, and neither do hats, hoods, plumes or a really impressive hairdo.

Counting the base

Start at the soles of the feet, not the table. A chunky base can add several millimetres to your reading and send you up a size you didn't need.

Going by the name on the box

A range called 28mm can measure anywhere from 28mm to well over 30mm. Measure one of yours instead.

Measuring the dwarf

He's meant to be short. Measure a 6ft human from the same range and order to that.

Measuring the kneeling archer

Lovely sculpt, terrible ruler reading. Find someone who's standing up.

Holding a ruler up to your screen

It tells you a lot about your screen and nothing about the miniature. Use the sizes on the product page, or the compare tool.

Choosing your size

It is your responsibility to check that the size you select is right for your collection before ordering. We offer miniatures in 28mm, 32mm, 35mm, 55mm and 75mm.

Our miniatures are printed to order. If you choose a size and then decide it wasn't the one you wanted, the miniature is not faulty and we are not at fault, but you can still return it to us under our Refund Policy, at your cost, for a refund.

The short version

Foot to eye, every time

Our sizes are measured from the soles of the feet to the eyes of a 6ft human, standing upright, with the base not counted. Shorter and taller characters stand lower or higher on purpose. Other ranges vary, so measure one of your own the same way and pick our nearest size, or line them up in the compare tool.

That's miniature sizes explained. Now for the hard part: choosing which ones to buy.

Found your size?

12,000+ models from leading independent designers, printed to order in the size you choose and ready to prime and paint.

Workbench guides Love Us Guarantee: full refund or replacement, no quibbles