Jorlan Frost Wolf Miniature Dire Wolf Undead
About this miniature
Made from high-quality resin. This menacing creature will make an immediate impact on any tabletop. Jorlan Frost Wolf Sculpted by VaultZ, this dire wolf miniature captures a snarling, hunched predator mid-stalk, its matted fur rendered in extraordinary detail across every inch of its powerful frame. The rippling coat, exposed claws, bared fangs, and sunken eyes combine to create a genuinely unsettling presence that suits horror, dark fantasy, and Halloween-themed collections alike.We 3D print each model in high-resolution resin right here in our workshop and ship the finished, ready-to-paint physical miniature directly to your door. No printing required on your part. The model arrives with a pre-formed oval base included; the only assembly needed is to superglue the miniature onto its base.Available in 28mm, 32mm, 35mm, 55mm, and 75mm scales, this sculpt scales beautifully from a skirmish-board beast to a striking display piece. It fits naturally into zombie apocalypse warbands, monster encounter sets, and creature collections. VaultZ consistently delivers sculpts rich in character and surface texture, making this wolf a standout addition to any painted miniature collection.
Made from high-quality resin. This menacing creature will make an immediate impact on any tabletop. Jorlan Frost Wolf Sculpted by VaultZ, this dire wolf miniature captures a snarling, hunched predator mid-stalk, its matted fur rendered in extraordinary detail across every inch of its powerful frame. The rippling coat, exposed claws, bared fangs, and sunken eyes combine to create a genuinely unsettling presence that suits horror, dark fantasy, and Halloween-themed collections alike.
We 3D print each model in high-resolution resin right here in our workshop and ship the finished, ready-to-paint physical miniature directly to your door. No printing required on your part. The model arrives with a pre-formed oval base included; the only assembly needed is to superglue the miniature onto its base.
Available in 28mm, 32mm, 35mm, 55mm, and 75mm scales, this sculpt scales beautifully from a skirmish-board beast to a striking display piece. It fits naturally into zombie apocalypse warbands, monster encounter sets, and creature collections. VaultZ consistently delivers sculpts rich in character and surface texture, making this wolf a standout addition to any painted miniature collection.
More Miniatures....
How we size our miniatures
We measure every mini from foot to eyeline, assuming a 6 ft male — so the millimetre is the eyeline, not the top of the helmet. Females, monsters, and smaller folk scale up or down so they don't look silly standing next to a standard human.
The standard for games like D&D and many roleplay games as well as older versions of Grimdark Battlefields.
Many games use this size as it provides more detail for painting and to fit with modern game systems like Grimdark Wargames and skirmish games. Also used for 28mm Monsters to give them even more threat.
When you need a bit more threat a 35mm mini in a 32 or 28mm game can add real weight to an encounter. Great for painting to maximise detail for the tabletop
Showpiece scale — built for shelf display, busts, and showcase paint jobs. Maximum surface area for blending, framing, and competition-grade detail.
Browse our full range and pick the scale that suits your project on any product page.
Questions we get asked
A LOT
We dispatch orders 5 days a week, due to our on-demand nature bigger orders can take longer to print and pass quality assurance. Our average dispatch time is 4 days with out longest 20 days for very large orders. You can contact us at anytime to check on the status of your order and any holdups. We can usually part dispatch any UK order is taking longer than usual, just ask!
NO!All our miniatures are dispatched washed and cured to offer you a clean and perfect base to prime and paint from. No waiting, just miniatures ready to use.
We print to order, so 3–5 working days on average but at busy times i can take a little longer for the UK and 7–14 for everywhere else.
Our Miniatures are made from Light reactive Resin, it's all very cutting edge science or witch craft we aren't too sure.
Our resin is designed to flex rather than snap, which helps prevent breakages during shipping. Occasionally, thin parts like swords, staffs, or gun barrels may arrive slightly bent—this is normal and easy to fix.
Recommended method – Warm water:
Dip the bent part into a bowl of lukewarm water for about 1 second, then gently hold the miniature so the part points straight down. If needed, repeat the process, adding an extra second or two. Once the resin cools, the new position will be locked in.
Other methods:
A hair dryer can work, but we don’t recommend it as heating the whole miniature may soften details or cause unwanted bends.
A radiator can also work, but use extreme care—too much heat can damage the resin.
If you’re unsure or need help, just get in touch and we’ll be happy to advise.
United Kingdom
Standard Shipping
- Standard UK Postage £3.95 or Free Over £50
Large or fragile shipping
- £5.50 or Free over £50
USA
International Parcel
- Standard International $26
- Free Over $115
Canada
International Parcel
- Standard International $18
- Free Over $150
We print all our orders on demand which means at busy times there can take us up-to 5 day to print and ship your order. Large orders will take longer to fulfill and we may choose to part dispatch your order so you're not waiting too long before at least receiving some of your order.
For the rest of the world is usually takes 7 - 16 days after dispatch. Please note Christmas can add a number of extra days onto all processing and shipping times .
Don't worry get in-touch with us and quote your order number and a replacement miniature will be dispatched ASAP. We try and remedy broken miniatures as a priority but during busy times it can take us a few days extra to get a replacement sent to you.
You can dispose of the broken miniature as you see fit or use it as part of your conversion projects.
Of course. Within 30 days of receiving your order you can have a full refund, no quibble. Please contact our support team and quote your order number and which parts you would like refunded. We work very hard to give 5 Star Service and Quality but understand we can't get it right every time. We hope you will consider us again in future, we are always learning!
A slight sheen on some areas is completely normal for cured resin and does not affect the model. It can show where supports were removed or where the surface cured a little differently during printing.
If you would like a uniform finish, a quick scuff with fine sandpaper followed by your usual primer gives an even, matte surface ready to paint.