DESIGNER Tabletop Miniatures · 28 TO 75MM

Top Table Miniatures Printing Service

Top Table Miniatures keeps a Patreon account under the name Alex Garton, with no public release feed for us to describe. Bring a file you own and we print it.

STEP ONE: GET THE FILES

Top Table Miniatures is listed on Patreon under the name Alex Garton. Get your files from the studio's own channel, then upload them to us.

PATREONSubscribe for minis every month

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

Top Table Miniatures sculpts, we print

Publicly, Top Table Miniatures amounts to a Patreon account in the name Alex Garton, dating from 2019, with nothing on display about the sculpts themselves. We will not describe work we will not see. The printing side has no such gap in it. Send us the STL you bought, whatever it turns out to be, and the price comes back with the file, calculated from the model rather than a catalogue. No minimum applies, so a single miniature is a normal order. Everything is printed to order in grey resin at our UK studio and reaches you ready to prime and paint, with the colours left entirely to you.

10,000+ 5★ reviews across our store and marketplace.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell toptableminiatures files. They do, on the 1 channel listed above. Pick what you want there, then bring it back here and we will print it.

How to get toptableminiatures files to print

Top Table Miniatures is listed on Patreon under Alex Garton. Take your files from the studio's own channel, then upload them here.

VISIT TOPTABLEMINIATURES

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £4.95, and UK delivery is free on orders of £55 and over. Large miniatures are £5.50. Postage to the USA is $20, and free on orders over $100. Other countries are calculated at checkout.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.