Stormborn Collectibles Printing Service
A tarrasque the size of a building, armoured from snout to tail. Demons with real weight to them, skeleton commanders, and centrepiece monsters built to finish a session.
Stormborn Collectibles sells the files themselves. Pick the monster you want from their own storefront, download it, and bring the file back here to have it printed.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
One monster, done properly
How to get Stormborn Collectibles files to print
Stormborn Collectibles sells the files themselves. Buy the monster you want from their storefront, download it to your machine, then come back here, upload it and we print it for you.
VISIT STORMBORN COLLECTIBLESWhat we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
Stormborn Collectibles makes centrepieces: a tarrasque armoured from snout to tail and built like architecture, demons with enough weight in the pose to look slow, and skeleton commanders who have clearly been at it a while. These are the models a session ends on, sculpted so the silhouette reads across the room before any of the detail does.
One monster is the whole point, and one monster is a complete order here. Upload your Stormborn Collectibles file, choose a height, and the price appears at once with no quote form and no minimum at all.
The finished piece arrives in high detail grey resin, primer-ready, printed in our UK workshop and posted to your door. Pick the monster you want from Stormborn Collectibles' own storefront, download the file, and bring it back here for printing.
Got a file already? Upload it and the price is on screen in seconds.