Rescale Miniatures Printing Service
Dragons with wings that fill a table. Giants, colossi, cinematic monsters and the fantasy heroes standing underneath them looking rather small, which is entirely the point of sculpting big.
Rescale Miniatures sells the files themselves, so head there first. Pick the dragon, the giant or the heroes you want, then bring the file back here and we print it.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Big sculpts, our printers
How to get Rescale Miniatures files to print
Get the files from Rescale Miniatures first. There is a monthly collection to follow and single sculpts sold one at a time. Save what you want, upload it here and choose the height.
VISIT RESCALE MINIATURESWhat we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
Our rescale miniatures printing service lets you choose the exact size for your resin-printed figures. Simply send us your STL files, tell us the scale or dimensions you need, and we will handle the rest.
Whether you need a model printed larger for display or smaller to fit a specific range, we resize and print your miniatures to order in resin. Every piece is produced on demand, so you get the size you actually want rather than a fixed off-the-shelf option.
To get started, use our contact or order form to share your STL files and your target scale. We will confirm the details and proceed with your custom resin print.
Got a file already? Upload it and the price is on screen in seconds.