Printerra Studios Printing Service
Roman era characters, monsters out of Irish myth and Japanese fantasy figures, with buildings and terrain for all of them to fight over. Whole adventures, sculpted from the first page to the last.
Printerra sells the files themselves. Head over to their own storefront, pick up the creatures, characters or terrain you want, then bring the files back here.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Adventures made solid
How to get Printerra files to print
Printerra sells its own files, so head there first. Pick the adventure or the single creature you want, download it, then bring the file back to this page and upload it for printing.
VISIT PRINTERRAWhat we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
This page is dedicated to the Printerra Studios printing service at We Print Miniatures. We 3D-print resin miniatures from Printerra Studios designs, bringing their sculpts to life as physical, print-on-demand miniatures.
Printerra Studios creates original miniature designs, and We Print Miniatures handles the resin printing. Each piece is printed to order, so you receive a freshly produced miniature direct from our print studio.
Browse the available Printerra Studios range to find the designs that suit your collection or gaming table. If you have a question about the service or a specific design, get in touch with the We Print Miniatures team.
Got a file already? Upload it and the price is on screen in seconds.