DESIGNER Monsters and terrain · 28 TO 75MM

Mystic Pigeon Gaming Printing Service

Eye-stalked horrors. Alchemical beasts caught halfway between two animals. Clusters of thin tentacles, plus terrain for fantasy and sci-fi tables and the accessories that go around them.

STEP ONE — GET THE FILES

Mystic Pigeon Gaming sells the files themselves. Choose the monsters and terrain you want from the designer first, then upload them here for us to print.

MYMINIFACTORYBuy just the minis you want CULTS3DBuy just the minis you want WEBSITEVisit Mystic Pigeon Gaming website

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

Their sculpts, our resin

Mystic Pigeon Gaming has a look you spot at once. The horrors come with eyes on stalks and limbs that trail away into nothing, the alchemical beasts sit halfway between two animals, and the terrain runs from fantasy to sci-fi with accessories to match. Odd, and very deliberately so.

We print in high detail grey resin at our own UK studio, which is what those tentacles want. The price appears as the upload finishes, so one Mystic Pigeon horror on its own is an order worth placing. Every model comes cleaned, ready to paint and posted to your door.

Over 35,000 customers rate our high quality resin 5 stars.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell Mystic Pigeon Gaming files. They do, on the 3 channels listed above. Pick what you want there, then bring it back here and we will print it.

How to get Mystic Pigeon Gaming files to print

The files come from Mystic Pigeon Gaming, sold one at a time, so pick the horrors and terrain you fancy from the designer and upload them here whenever you are ready.

VISIT MYSTIC PIGEON GAMING

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.