Maelstrom Designworks Printing Service
Heavy battle tanks and armoured fighting vehicles, mechs, spare turrets, hatches and track units, field generators and all the clutter that makes a battlefield look properly lived in.
Maelstrom Designworks sells the files themselves, so buy the vehicle or the parts you want from them first, download them, and bring the files back here.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Maelstrom machines in grey resin
How to get Maelstrom Designworks files to print
Maelstrom Designworks sells the files themselves, one at a time or by subscription. Download the vehicles and parts you want, then upload the files here and we print them and post them to you.
VISIT MAELSTROM DESIGNWORKSWhat we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
This page is your starting point for ordering Maelstrom Designworks miniatures printed in resin by We Print Miniatures.
Maelstrom Designworks is an independent sculpting studio. We Print Miniatures produces physical resin prints of their designs, printed to order and despatched to you directly.
Browse the available Maelstrom Designworks range above and add your chosen miniatures to your basket. If you have a question about the range or your order, please get in touch with the We Print Miniatures team.
Got a file already? Upload it and the price is on screen in seconds.