DESIGNER Collectible Characters · 28 TO 75MM

h3LL creator Printing Service

Expressive characters with clean cuts and ready to print files. h3LL creator is a small team making detailed, print ready fan art models built for printing and painting.

STEP ONE: GET THE FILES

h3LL creator releases on Patreon, with older models also available on Cults3D. Take the membership or the single model you want, download the files, then upload them here.

PATREONSubscribe for minis every month

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

h3LL creator sculpts, we print

A small team sits behind h3LL creator, making detailed print ready fan art models for 3D printing. The focus is stated plainly on their page: expressive characters, clean cuts, ready to print files and collectible releases made for printing and painting. Files prepared that carefully deserve a decent machine. Upload a h3LL creator file you own and the price is worked out from the model and shown immediately, with no minimum order to meet. We print to order in grey resin in the UK, wash and clean every piece, and remove the help by hand so the cut lines stay clean. It reaches you as a grey collectible waiting for primer and the paint you had in mind.

10,000+ 5★ reviews across our store and marketplace.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell h3LL creator files. They do, on the 1 channel listed above. Pick what you want there, then bring it back here and we will print it.

How to get h3LL creator files to print

Files come from h3LL creator, on their Patreon or through their Cults3D store. Download what you bought and upload it on this page.

VISIT H3LL CREATOR

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £4.95, and UK delivery is free on orders of £55 and over. Large miniatures are £5.50. Postage to the USA is $20, and free on orders over $100. Other countries are calculated at checkout.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.