Crowdfunding STL printing service
The drive is full. Twenty gigabytes of stretch goals, heroes and monsters by the campaign, terrain sets you have never once opened, and somewhere in there the five you actually want in your hands.
Those files come from the designers who ran the campaigns, and they are the ones who send them out. Gather the ones you want from your pledges, then bring them here.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Your backlog, our printers
How to get Kickstarter & Gamefound backlog files to print
The files come from the designers who ran the campaigns and reach you through your pledge. Fish out the ones you want to hold, upload them here at the height you choose, and we print them.
What we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
A Kickstarter or Gamefound pledge lands as files. Heroes and monsters by the campaign, terrain sets you have never once opened, stretch goals that turned up months after you had stopped thinking about them. Most backers end up with more in the folder than they could paint in a year, while the shelf stays empty.
Pick the five you actually want in your hands and send them to our crowdfunding STL printing service. Every file is priced the moment it uploads, so a couple of favourites or a whole range shows its total before you order anything, and there is no minimum.
- Printed from your own pledge and reward files
- Grey resin with the fine surface detail intact, washed and cured
- One figure or a whole campaign in a single order
Everything is printed in-house at our UK studio and sent out ready to prime. Gather the files from your pledges, upload them here, and the shelf finally catches up with the drive.
Got a file already? Upload it and the price is on screen in seconds.