Eldritch Foundry printing service
You built the character yourself: the armour, the robe, the weapon in the right hand, down to the face. A knight, a robed spellcaster or a dwarf adventurer, exactly as you designed them.
Eldritch Foundry is where the character gets built and the file comes from. Design your hero there, download the file, then bring it straight back here.
- PRICE
- Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
- FINISH
- High detail grey resin, washed and cured. Ready to prime and paint.
- YOUR FILE
- Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.
Your design, our printers
How to get Eldritch Foundry printing service files to print
Build the character at Eldritch Foundry and download the file they give you. Bring that file back here, choose a height, and we print it and post it to your door.
What we need from the file
One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.
No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.
Questions
Can you print my STL file?
Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.
How much does it cost?
The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.
What size can I have it printed at?
28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.
Do you print bases?
No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.
When will I receive my order?
We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.
What are the miniatures made from, and do I need to wash them?
Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.
What does postage cost?
UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.
What if a thin sword or barrel arrives bent?
Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.
What if my file will not print?
Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.
We also print
You built the character yourself on Eldritch Foundry: the armour, the robe, the weapon in the right hand, down to the face. Armoured knights, robed spellcasters, elf and dwarf adventurers, assembled piece by piece so the figure matches the character on your sheet instead of nearly matching it.
We turn that file into a model. Design your hero on Eldritch Foundry, download the file, then upload it here. The price appears at once, with no quote form, nobody to email and no smallest order, because one custom hero is exactly the order most people place.
Your character is printed on our own machines in high detail grey resin, washed and cured before it leaves, so the figure that reaches the table is the one you put together on screen.
Got a file already? Upload it and the price is on screen in seconds.