PRINTING SERVICE Wargaming · 28 TO 75MM

28mm custom miniature printing

Rank and file soldiers. Chunky weapon shafts, hands built a size larger than life so they read from the far end of the table, and a mixed shelf of older ranges to match.

STEP ONE — GET THE FILES

The sculpts come from the designers who drew them, sold file by file. Buy the troopers you want from them, then bring the lot back here to us.

Loading the studio

PRICE: Worked out from the size you choose, and shown in full with its breakdown before anything reaches your basket.
FINISH: High detail grey resin, washed and cured. Ready to prime and paint.
YOUR FILE: Stored securely and used only to make your print. Never sold, shared, or added to anything we sell.

Old ranges, new figures

28mm is the height the hobby settled on decades ago, and a good deal of the metal in your cabinet was cast to it. Files drawn at 28mm carry the proportions that go with it: sturdier limbs, a planted stance, detail cut deep enough to catch a wash. Print one and it belongs with what is already there.

Order at 28mm and a new figure lines up shoulder to shoulder with the ones you own. Each file is priced as it uploads, so a unit of twenty shows its total before you commit, and one trooper on its own is fine. High detail grey resin from our own UK studio, cleaned and ready for the primer can.

Over 35,000 customers rate our high quality resin 5 stars.

RULE OF THUMB

Sizes run from 28mm to 75mm, measured foot to eye, so your miniature matches the collection it is joining. You can type an exact height instead.

WHERE THE FILES LIVE

We do not sell 28mm custom miniature printing files. They do, on the their own storefront. Pick what you want there, then bring it back here and we will print it.

How to get 28mm custom miniature printing files to print

The files come from the designers who sculpt them. Buy the unit, or the single figure, then upload it here at 28mm and we will print it and post it out to you.

What we need from the file

One miniature per STL, exactly as it came out of the download. Send the plain model rather than a pre-prepared or sliced version, because those confuse the sizing, and we do that part here.

No bases. We print the miniature, not the base it stands on, so leave those out of what you send. If a model comes in parts, upload each part separately and we will print them together.

Questions

Can you print my STL file?

Yes. Upload it above, size it foot to eye, and the tool prices the job on the spot. You need to own the model or have the right to have it printed, and one of our team checks every file before it goes on a printer.

How much does it cost?

The price appears the moment your file uploads, worked out from the size you choose, and it is the whole price with nothing to add afterwards. There is no minimum order, so one model is a perfectly normal order.

What size can I have it printed at?

28mm, 32mm, 35mm, 55mm or 75mm measured foot to eye, or type an exact height instead. 75mm is the largest we print.

Do you print bases?

No. We print the miniature itself, so leave bases out of what you send. If a model comes in parts, upload each part separately and we will print them together.

When will I receive my order?

We dispatch five days a week and print on demand. Our average dispatch time is four days, and a very large order has taken as long as twenty. You can contact us at any time to check on your order, and we can usually part-dispatch a UK order that is taking longer than usual.

What are the miniatures made from, and do I need to wash them?

Light-reactive resin, and no. Every miniature is dispatched washed and cured, so it arrives clean and ready to prime and paint.

What does postage cost?

UK standard postage is £3.95, or free over £50. Large or fragile parcels are £5.50, or free over £50. International parcels are $26 to the USA, free over $115, and $18 to Canada, free over $150.

What if a thin sword or barrel arrives bent?

Our resin flexes rather than snaps, which protects it in the post, so a slim part can arrive slightly bent. Dip it in lukewarm water for a second, hold it straight as it cools, and the new position locks in. Repeat if it needs it, and ask us if you would rather we advised first.

What if my file will not print?

Every custom print is made to order from your file, and we cannot know whether a model will print until we try. If yours cannot, we refund the miniature fee in full. The setup fee covers preparation already done and is not refundable, and a made to order print is exempt from change of mind returns.